If there are any DNS server IP addresses listed there, write them down for future reference, and remove them from this window Click Advanced and select the DNS tab.Select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) and then click Properties To change the settings for a wireless connection, right-click Wireless Network Connection -> Properties.To change the settings for an Ethernet connection, right-click Local Area Connection -> Properties.Select the connection for which you want to configure Google Public DNS.Click Network and Internet -> Network and Sharing Center -> Change Adapter Settings.If you need specific instructions for your operating system/version, please consult your vendor's documentation The instructions may differ between different versions/releases of each operating system, we will only give one version as an example.Some devices use separate fields for all eight parts of IPv6 addresses and cannot accept the :: IPv6 abbreviation syntax. For IPv6-only networks with a NAT64 gateway using the 64:ff9b::/96 prefix, you can use Google Public DNS64 instead of Google Public DNS IPv6 addresses, providing connectivity to IPv4-only services without any other configuration. You can configure Google Public DNS addresses for either IPv4 or IPv6 connections, or both. You can specify both addresses, but do not specify the same address as both primary and secondary. You can use either address as your primary or secondary DNS server. The Google Public DNS IPv6 addresses are as follows: The Google Public DNS IP addresses (IPv4) are as follows: It is very important that you keep these numbers for backup purposes, in case you need to revert to them at any time. Before you change your DNS settings to use Google Public DNS, be sure to write down the current server addresses or settings.

World of warships server status